Spares for Excell22 SystemsXL22 and Sampler |
|
| XL22 | Sampler |
These lists will help you to identify and order
the right spare part, with its part number. We will soon be adding photographs
to assist the process.
All other parts will be invoiced upon shipment and, if under warranty,
will be credited upon return (30 days US, 90 days International). Please
verify on the RMA or RMA Shipper if return of the defective part is requested.
Excell 22
| Part Number | Description |
| 012-8414-001 | Tubing, Tygon, 1/16ID, Red (per foot) |
| 012-8415-001 | Tubing, Tygon, 1/8ID,1/16W (per foot) |
| 012-8415-002 | Tubing, Tygon, 1/32ID,1/32W (per foot) |
| 012-8415-003 | Tubing, Tygon, 1/16ID,1/8OD (per foot) |
| 012-8415-004 | Tubing, Silastic, .062 (per foot) |
| 012-8415-007 | Tubing, Tygon, MICRO, .060 X 0.020 (per inch) |
| 012-8415-009 | Tubing, Tygon, 5/32 X 3/32 (per foot) |
| 012-8415-011 | Tubing, Tygon, 5/16 X 3/16 (per foot) |
| 012-8415-013 | Tubing, Tygon, 1/8 ID, Red (per foot) |
| 012-8415-017 | Tubing, Tygon, .04ID X .13OD (per foot) |
| 014-1211-303 | Fan, 2.36 x 2.36 x .59, Top Cover, XL22 |
| 021-0001-301 | Conn. Banana Plug, Gold Shield |
| 021-6041-033 | Power Cord, INDIA |
| 021-6041-034 | Power Cord, CHINA |
| 024-1040-111 | Plastic Thumb Screw Cap |
| 024-6103-103 | RED indicator Lamp |
| 024-6103-104 | WHITE indicator Lamp |
| 025-3112-133 | 3/32" x 2" O-Ring, 10" Reservoirs |
| 025-3112-141 | 3/32 X 2.5" O-Ring-5PSI Reservoir, Waste Jar |
| 025-3113-204 | O-ring, Buna 70 1/8 X 5/8, Lyse O-Ring |
| 025-3116-008 | O_RING 2mm X 4mm |
| 025-3131-008 | O-RING BUNA 70 1/16X5/16, Light Pipes |
| 025-3131-010 | O-RING Viton 70 1/16X5/16, (SV Wash Block, XL22) |
| 025-3131-011 | O-Ring, Viton 70, 1/16 x 7/16 |
| 025-5050-187 | Retaining Ring Ext. 0.187 Dia., Dilutor Assy. |
| 025-5050-250 | E Clip .250, Dilutor Assy. |
| 025-6020-001 | Compression Spring 0.54 x 0.063 x 0.5, Slide Valve |
| 025-6030-001 | Wave Spring Washer, HGB Systems |
| 027-0206-106 | LINE FILTER |
| 027-0206-113 | Power Enrty Module |
| 027-1121-741 | FILTER, FLUID, 25MM DIA. |
| 028-2507-106 | Roll Pin, 3/32 x 3/4 |
| 029-3010-305 | Pioneer Computer |
| 029-3020-301 | Printer, Color Ink Jet, XL22 |
| 029-3030-014 | Keyboard, US |
| 029-3030-112 | Monitor, Pioneer |
| 037-0130-601 | 540 NM OPT BANDPASS FILTER |
| 037-2093-201 | PHOTODIODE,PIN,SI,TO-5 |
| 037-4000-001 | Slotted Optical Switch (met tube Bd) |
| 037-4000-002 | Optical Sensor Wash Block |
| 040-2215-202 | DC Converter, 5V: +/- 15V, 3 W |
| 040-2215-203 | DC Converter, 5V: +/- 15V, 5 W |
| 040-4030-041 | Battery, Lithium, 3V, Coin |
| 041-3000-006 | WESCOR Check Valve |
| 041-3000-013 | Check Valve, 1/8" In Line, Hi Flow |
| 041-3000-014 | Check Valve, 1/8" In Line, Hi Flow (Filter Box Assy) |
| 041-3866-746 | 1/4-28 Teflon Plug, Slide Valve |
| 041-3880-004 | Clamp, 1 Ear w /Liner, new Guard Block |
| 041-3880-007 | 1/4" Hose Clamp, V28, XL22 |
| 045-9024-003 | 12V, 2W, 1/16 PORT (Ref: FRU-8400-008) |
| 045-9024-004 | 12V, 3W, 1/8 PORT (Ref: FRU-8400-009) |
| 045-9024-010 | 12V, 2W, 1/8 PORT (Ref: FRU-8400-010) |
| 045-9024-013 | 12V, 3W, MANIFOLD (Ref: FRU-8400-024) |
| 045-9024-014 | 9V, 3W, RED LEAD (Ref: FRU-8400-018) |
| 045-9024-017 | 12V, 2W, MANIFOLD (ROUND) (Ref: FRU-8400-025) |
| 045-9024-018 | 12V, 3W, MANIFOLD, COIL (SQUARE) (Ref: FRU-8400-026) |
| 048-8702-200 | Electronic Potentiometer, Z-3 |
| 051-1329-013 | Fuses, 250V, 2A, SB (5x20) |
| 051-3721-242 | Switch, Micro w / Arm |
| 051-4212-551 | Power Switch, Excell22 |
| 051-5013-002 | External Waste Float Switch |
| 055-0220-012 | Sensor, Pressure/Vacuum, Solid State |
| 055-0220-013 | Sensor, Pressure 14.5 PSI |
| 056-5713-004 | Power Cord Ferrite Filter, CE Compliance |
| 056-7110-001 | Power Conditioner, Powervar 110V |
| 060-3200-801 | Network Cable, RJ45, 10' (Computer to Instrument) |
| 060-3210-100 | Cable Assy. Coax w / BNC 12' |
| 060-3210-302 | Cable Assy, I2C, Shielded, 60" (XL 22 Post-date 4/01) |
| 060-3220-001 | Cable Assy, I2C, 60" (XL 22 Prior 4/01) |
| 060-3222-502 | Printer Cable, 6 Foot |
| 060-3232-502 | Printer Cable, 6 Foot, CE Mark Compliance |
| 060-6951-802 | Power Cord International |
| 060-6981-801 | Power Cord US |
| BAB-0138-005 | Lyse Cap, 30mm Modified |
| BAF-0091-001 | Nut Plate, Waste Jar |
| BAF-7007-001 | Z55 - Metering tubes/keyboard Ctrl XL seies & XL22 |
| BAF-7015-036 | Programmed Eprom, WB/Slide Valve, XL22 (Z-1) |
| BAF-7015-037 | Programmed Eprom, Dilutor Controller, (Z-4) |
| BAF-7015-038 | Prog. Eprom, Pump ,Controller, (Z-3) (Obsolete See TSB 28) |
| BAF-7015-040 | Programmed Flash, Excell22 PC104 (Obs see FRU-8808-119) |
| BAF-7015-041 | Flash, XL22 Sequencer (Z-53, Z-54 - rev 2.2.1 |
| BAF-7015-050 | Programmed EPLD, Excell22 Add Dec (U11) |
| BAF-8014-001 | Dual Metering Tube Board, Excell Series |
| BAF-8998-005 | Ex-zyme Pickup Tube (European Reagents) |
| BAF-8998-006 | Ex-zyme Pickup Tube (Domestic Reagents) |
| BAF-8999-005 | Ex-Iso Pickup Tube (European Reagents) |
| BAF-8999-006 | Ex-Iso Pickup Tube (Domestic Reagents) |
| BAH-8007-001 | Guard Electrode Block Assy.,. |
| BAK-0130-001 | Nut, Retainer Excell Series |
| BAK-0161-001 | Metering Tube, 3.5" Lg |
| BAK-0166-001 | Electrode Strap Retainer |
| BAK-8064-001 | Lyse Pick UpTube Assy.(Not for EX-Pac) |
| BAK-8067-001 | Waste Tube Assy. |
| BAL-0073-001 | Lead Screw / Flange Modified |
| BAN-0040-001 | Nut, Retainer Needle, Excell Series |
| BAN-0041-001 | Wash Block Shoulder Screw, Excell Series |
| BAN-0222-001 | Transfer Tube, EXSAM, XL22 (Current) |
| BAR-0001-001 | Piston, Aspiration, XL22 |
| BAR-0004-001 | Piston, Diluent, XL22 |
| BAR-0009-001 | Piston, Injector, XL22 |
| BAR-0011-001 | Piston, Lyse, XL22 |
| BAR-0015-001 | Piston, Sheath, XL22 |
| BAR-8061-001 | Installation Kit, XL22 |
| BAR-8997-002 | Ex-Flow Pickup Tube |
| DIL-8087-001 | Rinse Line (Red), EXSAM |
| FRU-8000-220 | Powervar Power Cond., 220V Intl. (w / Power Cord-2ea) |
| FRU-8100-005 | WBC Aperture Assy. |
| FRU-8400-005 | Pressure Reservoir Assy. |
| FRU-8400-008 | Valve, 12V, 2W, 1/16 port |
| FRU-8400-009 | Valve, 12V, 3W, 1/8 port |
| FRU-8400-010 | Valve, 12V, 2W, 1/8 port, Membrane |
| FRU-8400-013 | Valve, 12V, Pinch Valve Normally Open |
| FRU-8400-018 | Valve, 9V, 3W, 5/32 port, Red Leads |
| FRU-8400-024 | Valve, 12V, 3W, Manifold Mtd. |
| FRU-8400-025 | Valve, 12V, 2W, Manifold (round) |
| FRU-8400-026 | Valve, 12V, 3W, Manifold, Coil (square) |
| FRU-8400-070 | Valve, 12V, 2 Way, 1/16 Port, Wet Sleeve, EPDM Seal (sheath) |
| FRU-8400-130 | Paint, Touch Up, Drew Ash Gray |
| FRU-8400-131 | Paint, Touch Up, Drew Green |
| FRU-8516-004 | Delay Line assy., (Silencer) |
| FRU-8516-005 | RBC Aperture Excell, AL 8X8, 3000 Excell 22 |
| FRU-8516-010 | WBC Transducer Excell Series |
| FRU-8516-025 | "O" ring Kit, Apertures Excell, AL 8X8, ATAC, 3000 |
| FRU-8516-030 | Needle Assy., W/Nut & O-ring (New Style) |
| FRU-8516-059 | Guard Block Assy Modification Kit |
| FRU-8516-072 | Hgb, LED w/ Board Obsolete, See FRU-8516-073) |
| FRU-8516-073 | HGB LED REPLACEMENT KIT |
| FRU-8808-001 | WOC Acquisition Board |
| FRU-8808-002 | 386SX CPU, PC104, 33MHz, (obsolete see FRU-8808-120) |
| FRU-8808-003 | Lan-Ethernet, PC104, (Network Adapter Card) |
| FRU-8808-004 | Reagent Detector Board |
| FRU-8808-005 | Laser Driver PCB |
| FRU-8808-006 | Extension/PMT, Pre-AMP board |
| FRU-8808-007 | Detector Array, Pre-AMP Board |
| FRU-8808-008 | Sequencer/ Impedance Amp Board |
| FRU-8808-009 | Sequencer Interface Board |
| FRU-8808-010 | Pump / Dilutor Cont. Board |
| FRU-8808-011 | Valve Driver Board |
| FRU-8808-012 | Wash Block / Slide Valve Controller Board |
| FRU-8808-014 | Laser Temp Sensor Board, Fan Assy, XL22 |
| FRU-8808-020 | EX-Flo Reservoir Assy Excell22 |
| FRU-8808-021 | Exzyme Reservoir Assy Excell22 |
| FRU-8808-022 | EX-Iso Reservoir Assy Excell22 |
| FRU-8808-023 | Slide Valve, Rear Pad Excell22 |
| FRU-8808-024 | Slide Valve, Front Pad, Excell22 |
| FRU-8808-025 | Rinse Block Excell22 |
| FRU-8808-026 | Slide Valve Bushing w / Drive Shaft and Gear |
| FRU-8808-027 | Slide Valve Motor w/ Gear, Excell22 |
| FRU-8808-028 | 0.2 Micron Filter Assy, Excell22 (Diluent) |
| FRU-8808-029 | Flow Cell Assy w / Injector (Obs. see: FRU-8808-072) |
| FRU-8808-030 | Rinse Block Motor Assy |
| FRU-8808-031 | Start Switch Assy (obsolete - see FRU-8808-075) |
| FRU-8808-032 | High Vac / Waste Reservoir |
| FRU-8808-033 | Low Vac Reservoir |
| FRU-8808-034 | WOC Mixing Motor Assy |
| FRU-8808-035 | RBC Mixing Motor Assy |
| FRU-8808-036 | WIC Cuvette Assy |
| FRU-8808-037 | WOC Cuvette Assy |
| FRU-8808-038 | Pre-Mix Cuvette Assy |
| FRU-8808-039 | RBC Cuvette Assy w / Silencer |
| FRU-8808-040 | Linear Actuator 12VDC WOC Injector |
| FRU-8808-041 | Linear Actuator 12VDC, 0.001 STP (Sample Aspirator) |
| FRU-8808-042 | Barrier Filter Assy. Excell22 |
| FRU-8808-043 | Dilutor O-ring Kit Excell22 |
| FRU-8808-044 | Dilutor Motor, Excell22 |
| FRU-8808-045 | Vacuum Pump, Excell22 |
| FRU-8808-046 | Pressure Pump,Excell22 |
| FRU-8808-047 | Laser Assy, Excell 22 |
| FRU-8808-048 | Injector Line Tubing Assembly |
| FRU-8808-049 | WOC Tubing Kit Upgrade |
| FRU-8808-050 | Fluidics Upgrade Kit |
| FRU-8808-051 | WOC Flow Cell Adjustment Tool |
| FRU-8808-053 | WIC Cuvette Assy |
| FRU-8808-054 | Optic Head Assy, XL22 (Obs. see: FRU-8808-073) |
| FRU-8808-055 | UPS 400 VA 230 VAC, International |
| FRU-8808-056 | UPS 400VA 110VAC, Domestic |
| FRU-8808-057 | PMT Assy |
| FRU-8808-058 | Power Supply Assy |
| FRU-8808-059 | Power Supply 5V / 50W |
| FRU-8808-060 | Power Supply 12V / 10W |
| FRU-8808-061 | Diluter/Aspirator/ Injector assy. W Diluter/pump controller |
| FRU-8808-062 | Coax Cable, Optics |
| FRU-8808-063 | Injector Assy (Obs. see: FRU-8808-074) |
| FRU-8808-064 | I2C Network / Communication Board |
| FRU-8808-065 | Microcontroller, SV / WB, U-5 |
| FRU-8808-067 | Dilutor Block and Drive Assy |
| FRU-8808-068 | Filter Assy, .2 Micron (new - sheath) |
| FRU-8808-069 | Sheath Filter & Valve Upgrade |
| FRU-8808-070 | Cooling Fan Retrofit Kit Excell 22 |
| FRU-8808-071 | Reserved |
| FRU-8808-072 | Flow Cell Assy w / Injector 2 ports |
| FRU-8808-073 | Optic Head Assy (Current rev.) |
| FRU-8808-074 | Flow Cell Injector 2 ports (not for old flow cell) |
| FRU-8808-075 | Start switch W leads |
| FRU-8808-076 | Injector Barb fittings connectors(5 /pkg) |
| FRU-8808-077 | Reserved |
| FRU-8808-078 | Optic head power cable |
| FRU-8808-079 | V37 adapter block |
| FRU-8808-080 | Tube clamps (plastic - pack of 10) |
| FRU-8808-081 | Fan with wiring |
| FRU-8808-082 | Float switch waste sensor |
| FRU-8808-083 | Excell 22 Cleaning line |
| FRU-8808-084 | Ethernet Cable, Shielded |
| FRU-8808-085 | Power Cord IEC M/F 1 m, Shielded (UPS to system, Intl') |
| FRU-8808-086 | Power Cord IEC NEMA 5-15P, Shielded (USA |
| FRU-8808-087 | Reserved |
| FRU-8808-088 | Reserved |
| FRU-8808-089 | Reserved |
| FRU-8808-090 | Reserved |
| FRU-8808-091 | Reserved |
| FRU-8808-100 | Retrofit Kit, Ex-Sam XL 22 |
| FRU-8808-101 | I2C BUS Enhancement |
| FRU-8808-102 | Bar Code Reader XL 22 (Keyboard Wedge) |
| FRU-8808-104 | Opticon Barcode Reader, XL22 |
| FRU-8808-115 | Preventative Maintenance Kit, XL22 |
| FRU-8808-116 | Pump / Dilutor Cont. Board for UI before 2.2.2 |
| FRU-8808-117 | Sequencer/ Impedance Amp Board before 2.2.2 |
| FRU-8808-118 | Disk on Chip - 2.2.2 UI |
| FRU-8808-119 | Disk on Chip - prior 2.2.2 UI |
| FRU-8808-120 | 386SX CPU - PC 104 W disk on chip -rev 2.2.2 |
| FRU-8808-121 | Front Cover, XL22 |
| FRU-8808-122 | 386SX CPU - PC 104 W disk on chip - prior rev 2.2.2 |
| FRU-8808-123 | Programmed Flash, XL 22 - V 2.2.2 (Z53 & Z54) |
| FRU-8808-200 | User Interface V 2.2.1 - XL22 (obsolete) |
| FRU-8808-201 | User Interface V 2.2.2 upgrade kit - XL22 |
| FRU-8808-202 | User Interface V 2.2.2 upgrade kit - XL22 with SP1 |
| FRU-8808-300 | Service CD Rev.Jan 03 |
| FRU-8808-302 | Service CD Rev. Win 2000 service packs (V 2.2.2) |
| FRU-8900-002 | Dilutor Block Assy w/o Motor D-12 |
| FRU-9000-001 | Vacuum/Press. Gauge |
| FRU-9000-002 | Nut Driver 1/4" |
| FRU-9000-003 | Nut Driver 11/32" |
| FRU-9000-004 | U.S. Standard Ball Allen Wrench Set |
| FRU-9000-005 | Digital Multi-Meter |
| FRU-9000-006 | Test Lead Black |
| FRU-9000-007 | Test Lead Red |
| FRU-9000-008 | Flat Blade and PhillIps Screw Driver Set |
| FRU-9000-009 | Needle Nose Pliers |
| FRU-9000-010 | Diagonal Cutting Pliers |
| FRU-9000-011 | Precision Knife |
| FRU-9000-012 | E-Prom Extractor |
| FRU-9000-013 | Curved 6" Hemostats |
| FRU-9000-014 | Precision Knife Replacement Blades |
| FRU-9000-015 | 3/8" Open/Box End Wrench |
| FRU-9000-016 | Standard Hardware Kit |
| FRU-9000-017 | Hydraulic Fittings Kit |
| FRU-9000-018 | US Std Punch Set |
| FRU-9000-019 | LINEARITY SPREADSHEET DISKETTE |
| FRX-8808-047 | Laser Assy, Excell 22, Refurb |
| 4205-A | Particles, 5.01 |
| 4207-A | Particles, 6.992 |
| DC-111 | Dow Corning 111 Compound |
| EX-530L | Hematology Linearity Kit |
| M-Excell22 | Manual, Operator, Excell22 |
| M-Excell22-S | Manual, Service , Excell 22 (printed copy) |
| MIExcell22 | Manual, Operator, Excell22, Infolab |
| R-001L | Lubricant Slide |
| R-005C | Light Pipe Cleaner |
| R-005L | Lubriplate |
| S-0002 | Waste Container |
Sampler
| Part Number | Description |
| 012-8415-001 | TUBING,TYGON,1/8ID,1/16W |
| 012-8415-003 | TUBING,TYGON,1/16ID,1/8OD |
| 012-8415-004 | TUBING SILASTIC .062 |
| 012-8415-007 | TUBING, TYGON, MICRO, .060 X 0.020 |
| 012-8415-015 | TUBING, TYGON, MICRO, .040 |
| 013-9030-003 | Buzzer compact |
| 014-1000-004 | GUARD, FAN 2.36 INCH SQUARE |
| 014-1000-005 | Filter/Guard/Grille For 2 |
| 014-1219-301 | Fan 12V, 19CFM |
| 021-6041-033 | Power Cord, INDIA |
| 021-6041-034 | Power Cord, CHINA |
| 025-3111-004 | O-ring, Buna 70 1/16 X .210, Cap Piercer |
| 025-3131-010 | O-RING Viton 70 1/16X5/16, (SV Wash Block, XL22) |
| 025-3131-012 | O-Ring, Viton70 1/16 X 5/8 |
| 025-3420-002 | Belt, Timing 2.5P/200mm |
| 027-0000-002 | Power Entry Module |
| 040-0310-112 | Power Supply, LPQ112 |
| 041-1111-005 | 12 VDC Vac/Pressure Pump |
| 041-3000-009 | Check Valve, 1/8' In Line |
| 045-9024-004 | 12V, 3W, 1/8 PORT (Ref: FRU-8400-009) |
| 045-9024-010 | 12V, 2W, 1/8 PORT (Ref: FRU-8400-010) |
| 051-1329-100 | Fuse, 250V, 1A, SB, 5 x 20 Metric, |
| 056-5713-004 | Power Cord Ferrite Filter, CE Compliance |
| 060-3120-902 | Cable, Setup for Internal Barcode Reader |
| 060-3210-302 | Cable Assy, I2C, Shielded, 60" (XL 22 Post-date 4/01) |
| 060-3220-001 | Cable Assy, I2C, 60" (XL 22 Prior 4/01) |
| BAK-0393-001 | Thumbscrew Assy, Needle Retainer |
| BAN-0103-001 | Carousel 1, AS-30/EXSAM |
| BAN-0103-002 | Carousel 2, AS-30/EXSAM |
| BAN-0103-003 | Carousel 3, AS-30/EXSAM |
| BAN-0196-121 | Front, Danam EXSAM (obsolete, see FRU-8740-024) |
| BAN-0196-125 | Front, ATAC Autosampler |
| BAN-0220-001 | Needle, Cap Piercing (obsolete, see FRU-8740-023) |
| BAN-0222-001 | Transfer Tube, EXSAM, XL22 (Current) |
| BAN-0287-001 | Barcode Reader Mounting Bracket, Autosampler |
| BAN-7005-001 | Eprom, Cap Piercer, Ex-Sam for Excell Series |
| BAN-7005-002 | Eprom, Cap Piercer, Ex-Sam for XL22 (Obsolete) |
| BAN-7005-003 | Eprom, Cap Piercer, Ex-Sam for XL22 (Obsolete) |
| BAN-7006-001 | Eprom, Carousel, Ex-Sam for Excell Series |
| BAN-7006-002 | Eprom, Carousel, Ex-Sam for XL22 (Obsolete) |
| BAN-8082-001 | PCB, Optical Sensor Assy (obsolete, see FRU-8740-022) |
| BAN-8083-001 | PCB Keypad Assy (obsolete, see FRU-8740-025) |
| BAN-8095-001 | PCB, I2C Ex-Sam (obsolete, see FRU-8740-016) |
| BAN-8099-001 | Cable, Ex-Sam CPU to Ex-Sam Comm. Board, XL22 |
| DIL-0146-001 | Transfer Tube, EXSAM for Excell Series |
| DIL-8004-001 | Carousel Drive Assy (Obsolete, See FRU-8740-021 |
| DIL-8085-001 | Cap Piercer Assy, EXSAM (Obsolete, See FRU-8740-018) |
| DIL-8087-001 | Rinse Line (Red), EXSAM |
| FRU-8000-220 | Powervar Power Cond., 220V Intl. (w / Power Cord-2ea) |
| FRU-8400-009 | Valve, 12V, 3W, 1/8 port |
| FRU-8400-013 | Valve, 12V, Pinch Valve Normally Open |
| FRU-8516-034 | Ex-Sam Back Panel, XL22 |
| FRU-8700-001 | Waste Vac. Reservoir w / fittings AS1, AS 30, EXSAM |
| FRU-8740-001 | Carousel Motor Assy EXSAM |
| FRU-8740-002 | Needle Motor Assy EXSAM (obsolete see FRU-8740-018) |
| FRU-8740-003 | Tube Position Diode |
| FRU-8740-004 | Tube Position Transistor (Obsolete, see FRU-8740-020) |
| FRU-8740-005 | Inner & Outer Wash Chamber w/O-rings |
| FRU-8740-006 | CPU, PCB, Ex-Sam, XL/ATAC |
| FRU-8740-007 | CPU, PCB, Ex-Sam, XL22 (obsolete see FRU-8740-014) |
| FRU-8740-009 | Power Supply, Ex-Sam |
| FRU-8740-010 | Barcode Reader, Internal, Programmed, Ex-Sam |
| FRU-8740-011 | Reserved |
| FRU-8740-012 | Reserved |
| FRU-8740-013 | Reserved |
| FRU-8740-014 | CPU P.C.B. EX-SAM XL-22 |
| FRU-8740-015 | EX-Sam Press/Vac Pump |
| FRU-8740-016 | A/S I2C COMM PCB |
| FRU-8740-017 | A/S CPU Upgrade - TSB 30 |
| FRU-8740-018 | Cap Piercer assy. |
| FRU-8740-020 | Reserved |
| FRU-8740-021 | Carousel Drive assy. W motor |
| FRU-8740-022 | Optical Sensor Assy carousel (Sync & Pos) |
| FRU-8740-023 | Needle, Dual concentric Cap Piercing |
| FRU-8740-024 | Front, DREW EXSAM |
| FRU-8740-025 | PCB Keypad Assy |
| FRU-9000-001 | Vacuum/Press. Gauge |
| FRU-9000-004 | U.S. Standard Ball Allen Wrench Set |
| FRU-9000-005 | Digital Multi-Meter |
| FRU-9000-006 | Test Lead Black |
| FRU-9000-007 | Test Lead Red |
| FRU-9000-008 | Flat Blade and PhillIps Screw Driver Set |
| FRU-9000-009 | Needle Nose Pliers |
| FRU-9000-010 | Diagonal Cutting Pliers |
| FRU-9000-011 | Precision Knife |
| FRU-9000-012 | E-Prom Extractor |
| FRU-9000-013 | Curved 6" Hemostats |
| FRU-9000-014 | Precision Knife Replacement Blades |
| FRU-9000-016 | Standard Hardware Kit |
| FRU-9000-017 | Hydraulic Fittings Kit |
| DC-111 | Dow Corning 111 Compound |
| M-EX-SAM | EX-Sam Operator's Manual |