Spares for DataCell 16 SeriesDataCell 16 CP, AL816 |
|
| Spares |
This list will help you to identify and order
the right spare part, with its part number. We will soon be adding photographs
to assist the process.
All other parts will be invoiced upon shipment and, if under warranty,
will be credited upon return (30 days US, 90 days International). Please
verify on the RMA or RMA Shipper if return of the defective part is requested.
DataCell 16CP, AL816
| Part Number | Description |
| 012-8414-001 | Tubing, Tygon, 1/16ID, Red (per foot) |
| 012-8415-001 | Tubing, Tygon, 1/8ID,1/16W (per foot) |
| 012-8415-002 | Tubing, Tygon, 1/32ID,1/32W (per foot) |
| 012-8415-003 | Tubing, Tygon, 1/16ID,1/8OD (per foot) |
| 012-8415-007 | Tubing, Tygon, MICRO, .060 X 0.020 (per inch) |
| 012-8415-009 | Tubing, Tygon, 5/32 X 3/32 (per foot) |
| 012-8415-011 | Tubing, Tygon, 5/16 X 3/16 (per foot) |
| 012-8415-013 | Tubing, Tygon, 1/8 ID, Red (per foot) |
| 012-8415-017 | Tubing, Tygon, .04ID X .13OD (per foot) |
| 014-0010-001 | HGB Adjustment Screwdriver |
| 014-1221-101 | FAN,PANCAKE,110VAC,18CFM |
| 021-0001-330 | PHONO PLUG, SHIELD, GOLD |
| 021-3003-110 | CONNECTOR, LAMP SOCKET |
| 021-3003-113 | CONN,TRANSISTOR SOCKET |
| 024-1040-111 | Plastic Thumb Screw Cap |
| 024-5340-002 | Display, Incand., 8 Lines, 16CP/816 |
| 024-5503-091 | Display, Vac Flourescent 256x64, Russian 816 |
| 024-6103-102 | LAMP INC, T-1 3/4 BI PIN (HGB) (Ref: FRU-8400-102) |
| 025-2755-250 | LINEAR BEARING 0.25X0.5 (Diluter) |
| 025-3116-002 | SLIDE SHAFT "O" RING |
| 025-3131-008 | O-RING BUNA 70 1/16X5/16, Light Pipes |
| 025-3131-012 | O-Ring, Viton70 1/16 X 5/8 |
| 025-3131-014 | O-Ring, Viton70 1/16 X 1/2, Cap Piercer/Vacutainer Holder |
| 025-3172-105 | O-RING SLCN50 3/32X11/32 Waste Jar |
| 025-5050-500 | E clip .500, Diluter Assy. |
| 025-6030-001 | Wave Spring Washer, HGB Systems |
| 025-6061-015 | Compression Spring .3DIA Cap Piercer 16CP |
| 025-6600-003 | Curved Spring Washer, Slide Valve |
| 025-7000-001 | Torsion Spring-Cap Piercer |
| 027-0000-003 | Power Entry Module, 16CP/816 |
| 027-0206-106 | LINE FILTER |
| 027-1121-741 | FILTER, FLUID, 25MM DIA. |
| 028-0090-001 | Hinge Adjustable, 16CP/816 |
| 028-0421-002 | FUSE HOLDER, BUSSMANN |
| 028-3018-701 | SHOULDER SCREW, 1X.187 |
| 028-3301-825 | SHOULDER SCREW, SLOTTED, SHORT |
| 028-3301-850 | SHOULDER SCREW, SLOTTED LONG |
| 029-3021-003 | Printer stand |
| 037-0130-601 | 540 NM OPT BANDPASS FILTER |
| 037-0135-400 | Filter 540NM, Wide Band |
| 037-2093-201 | PHOTODIODE,PIN,SI,TO-5 |
| 037-4000-001 | Slotted Optical Switch (met tube Bd) |
| 037-4000-002 | Optical Sensor Wash Block |
| 040-0105-005 | Power Supply +5V +/- 12V |
| 040-0115-801 | Power Supply, +/-15V, Linear |
| 041-1111-004 | Pump Vac./Press. 12VDC (N711) (Ref: FRU-8400-062) |
| 041-1301-202 | PUMP 24VDC, (Air/Liquid), (NMP 30) |
| 041-1301-204 | VITON Plate (NMP 30) |
| 041-1301-205 | EPDM Diaphragm (NMP 30) |
| 041-1301-208 | KN 711, Membrane Replacement Kit |
| 041-1301-210 | Pump Piston 12VDC (Vacuum) |
| 041-3000-009 | Check Valve, 1/8' In Line |
| 041-3880-004 | Clamp, 1 Ear w /Liner, new Guard Block |
| 045-9024-003 | 12V, 2W, 1/16 PORT (Ref: FRU-8400-008) |
| 045-9024-004 | 12V, 3W, 1/8 PORT (Ref: FRU-8400-009) |
| 045-9024-010 | 12V, 2W, 1/8 PORT (Ref: FRU-8400-010) |
| 045-9024-016 | 12V, 3W, 0.063 PORT (Ref: FRU-8400-011) |
| 048-6270-201 | FET N-Channel EHN Mode 80V 3A |
| 051-1329-011 | Fuses Metric, 250V, 1.6 A, SB |
| 051-4212-550 | SWITCH,ROCKER,2P1T 115V 10A |
| 051-5013-002 | External Waste Float Switch |
| 055-0210-006 | Vacuum Sensor |
| 056-5713-004 | Power Cord Ferrite Filter, CE Compliance |
| 056-7110-001 | Power Conditioner, Powervar 110V |
| 060-3222-502 | Printer Cable, 6 Foot |
| 060-3232-502 | Printer Cable, 6 Foot, CE Mark Compliance |
| 060-6951-802 | Power Cord International |
| 060-6981-801 | Power Cord US |
| BAB-0138-005 | Lyse Cap, 30mm Modified |
| BAF-7015-013 | Software, AL816 |
| BAF-7015-014 | Software, AL816, Russian |
| BAF-8110-001 | Dual MeteringTube Bd, (1020, 16CP/816, EZ) |
| BAF-8206-001 | PCB Pulse Edit AL816 |
| BAF-8998-001 | Rinse/ Reference Pickup Tube |
| BAF-8999-001 | Diluent Pickup Tube |
| BAH-8007-001 | Guard Electrode Block Assy.,. |
| BAK-0166-001 | Electrode Strap Retainer |
| BAK-0263-001 | Light Pipe Cuvette |
| BAK-8007-001 | Slide Valve Assy |
| BAK-8060-001 | Power Supply Bd, 110VAC/ 40 VDC |
| BAK-8064-001 | Lyse Pick UpTube Assy.(Not for EX-Pac) |
| BAK-8067-001 | Waste Tube Assy. |
| BAL-0068-001 | Piston Diluent, 16CP/816 & Excell Series |
| BAL-0071-001 | Plunger Small, LYSE, 16CP/816 |
| BAL-0073-001 | Lead Screw / Flange Modified |
| BAL-0128-001 | Flag Sensor BD 16CP / 816 |
| BAL-0128-002 | Flag Sensor BD (Small) 16CP/816 |
| BAL-0171-001 | HOLDER VACUTAINER (Hemogard) |
| BAL-0171-002 | HOLDER, PRE-DILUTE AVL |
| BAL-0171-003 | HOLDER, MONOJECT,3ML |
| BAL-0171-004 | HOLDER, DC-TROL, 4.5ml |
| BAL-0171-005 | HOLDER VACUTAINER 7ml Short |
| BAL-0171-006 | HOLDER, MICROTAINER, sarsted |
| BAL-0171-007 | HOLDER, MONOVET, SARSTED, 2.7ml |
| BAL-0171-008 | HOLDER, MONOVET, SARSTED, 3.2ml |
| BAL-0171-009 | HOLDER, MONOJECT, 7ml |
| BAL-0171-010 | HOLDER, VIAL STRECK |
| BAL-0182-001 | Membrane Switch 16CP |
| BAL-0182-002 | MEMBRANE SWITCH, AL816 |
| BAL-0182-003 | Membrane Switch Infolab |
| BAL-0217-001 | Sampling Needle, 16CP/816 |
| BAL-0246-001 | Retainer O-Ring 16CP / 816 |
| BAL-0249-001 | WINDOW, MEMBRANE SWITCH |
| BAL-0250-001 | TECH FILM, MEMBRANE SWITCH |
| BAL-0255-001 | Metering Tube 16CP / 816 |
| BAL-0256-001 | COVER SLOT |
| BAL-0291-001 | HOLDER, PLASTIC, 10ml. |
| BAL-0291-002 | HOLDER, MICROTAINER |
| BAL-8003-001 | Opto Sensor Board (Blood Sensor) |
| BAL-8005-001 | Reagent Sensor Board |
| BAL-8006-001 | IR Sensor Board |
| BAL-8007-001 | IR Source Board |
| BAL-8036-001 | Diluter Assy., W Motor, 16CP/816 |
| BAL-8045-001 | CAP PIERCING ASSY |
| BAL-8050-001 | CPU W/1M MEM |
| BAL-8052-001 | Power Supply Assy |
| BAL-8054-109 | Display Assy 16CP |
| BAL-8054-113 | Display Assy, 816 Std |
| BAL-8054-114 | Display Assy I-1600 |
| BAL-8055-001 | Module Pump Assy |
| BAL-8059-001 | WBC Cuvette Assy, AL816 |
| BAL-8060-001 | Motor Controller Board Assy |
| BAL-8061-001 | Diluter Board Assy |
| BAL-8062-001 | Slide Valve Board |
| BAL-8063-001 | Cap Piercing Board |
| BAL-8064-001 | Valve Interface Board |
| BAL-8065-001 | Pump Interface Board |
| BAL-8066-001 | CPU Interface, 16CP/816 |
| BAL-8071-005 | AL816 Supplemental Installation Kit, |
| BAL-8075-001 | Reagent / Waste Line Guard Electrode |
| BAL-8081-149 | Programmed Eprom, 16CP, V1.4.9 |
| BAN-8059-001 | Pre Dilute Aspirate Assy (Not applicable in USA) |
| BAN-8063-001 | Installation Kit, AL 8X8 |
| FRU-8000-004 | Pulse Edit Board |
| FRU-8000-220 | Powervar Power Cond., 220V Intl. (w / Power Cord-2ea) |
| FRU-8036-001 | Assy, Dilutor Block 16CP/AL816 |
| FRU-8058-001 | Waste Jar Assy 16CP/AL816 |
| FRU-8100-005 | WBC Aperture Assy. |
| FRU-8100-006 | WBC Electrode Block Assy. W / Coax Conn |
| FRU-8116-002 | WBC Mixing Motor Block Assy, 16CP/816 |
| FRU-8116-007 | WBC Cuvette, W/Light Pipe/Fitting, 16CP/816 |
| FRU-8200-005 | RBC Aperture Assy. |
| FRU-8216-001 | RBC Cuvette Assy., Complete, 16CP/816 |
| FRU-8216-002 | RBC Mixing Motor Block Assy, 16CP/816 |
| FRU-8216-005 | RBC Cuvette W Fittings, 16CP/816 |
| FRU-8400-008 | Valve, 12V, 2W, 1/16 port |
| FRU-8400-009 | Valve, 12V, 3W, 1/8 port |
| FRU-8400-010 | Valve, 12V, 2W, 1/8 port, Membrane |
| FRU-8400-011 | Valve, 12V, 3W, 0.063 port |
| FRU-8400-102 | HGB Lamp Replacement Kit (5 Incandescent lamps) |
| FRU-8400-121 | Paint, Touch up Danam Excell |
| FRU-8400-130 | Paint, Touch Up, Drew Ash Gray |
| FRU-8400-131 | Paint, Touch Up, Drew Green |
| FRU-8416-018 | Cap Piercer Motor Assy w/ Gear |
| FRU-8416-020 | Block Wash, 816/CP |
| FRU-8416-021 | Predilute Aspirate Tip Assy 16CP/AL816 |
| FRU-8416-022 | Motor Slide W/Coupling Assy 16CP/816 |
| FRU-8416-023 | Slide Valve Bushing Assy, 16CP/816 |
| FRU-8416-024 | Slide Valve Shaft Assy, 16CP/816 |
| FRU-8416-025 | Reagent Ground Electrode 16CP/AL816 |
| FRU-8416-026 | Bushing w / Drive Shaft 16CP/AL816 |
| FRU-8416-027 | "O" Ring Replacement Kit, 816/16CP |
| FRU-8416-029 | Preventative Maintenance Kit 16CP |
| FRU-8416-032 | Dilutor Motor w/ Base Plate and Gears |
| FRU-8416-033 | Preventative Maintenance Kit AL816 |
| FRU-8416-034 | Cap Piercer Mechanism, 16CP |
| FRU-8516-059 | Guard Block Assy Modification Kit |
| FRU-8517-001 | Blood Sensor Assembly 16CP/AL816 |
| FRU-9000-001 | Vacuum/Press. Gauge |
| FRU-9000-002 | Nut Driver 1/4" |
| FRU-9000-003 | Nut Driver 11/32" |
| FRU-9000-004 | U.S. Standard Ball Allen Wrench Set |
| FRU-9000-005 | Digital Multi-Meter |
| FRU-9000-006 | Test Lead Black |
| FRU-9000-007 | Test Lead Red |
| FRU-9000-008 | Flat Blade and PhillIps Screw Driver Set |
| FRU-9000-009 | Needle Nose Pliers |
| FRU-9000-010 | Diagonal Cutting Pliers |
| FRU-9000-011 | Precision Knife |
| FRU-9000-012 | E-Prom Extractor |
| FRU-9000-013 | Curved 6" Hemostats |
| FRU-9000-014 | Precision Knife Replacement Blades |
| FRU-9000-016 | Standard Hardware Kit |
| FRU-9000-017 | Hydraulic Fittings Kit |
| FRU-9000-018 | US Std Punch Set |
| FRU-9000-019 | LINEARITY SPREADSHEET DISKETTE |
| 4205-A | Particles, 5.01 |
| DC-111 | Dow Corning 111 Compound |
| M-0016S | Manual, Service, Datacell 16CP |
| M-816S | Manual, Service, AL816 |
| M-NX16 | Manual, Operator, Excell 16, Infolab |
| R-001L | Lubricant Slide |
| R-005C | Light Pipe Cleaner |
| R-005L | Lubriplate |
| S-0002 | Waste Container |
| CH-3446 | Manual, Operator's AL 816 |